Shenzhen WT Hardware and Plastics
Tel: +86-755-27673590, 23143539
Add: 5B2, Jiangshi Building, Fuyong, Shenzhen, China
Our main products: Injection Mold, Molding Parts, Die Casting Mold, CNC machining of high quality
800T injection molding machine: temperature is the key to appearance and performance
In the process of 800T injection molding machine, the accuracy of temperature setting is the key to the appearance and performance of the products.http://www.wt-mold.com/
The temperature of the feeding area should be set very low to avoid blocking the inlet and escaping the air from the entrainment. When the color masterbatch is used to improve the mixing state, the temperature of the transition area should be set above the melting point of the color masterbatch. The temperature of the nearest region from the injection nozzle should be set close to the required melt temperature. Therefore, after testing, the temperature range of TPR products in different areas is usually 160 cylinders, 210 degrees Celsius and 180 degrees Celsius to 230 degrees Celsius.http://www.wt-mold.com/
The mold temperature should be set high and the condensation temperature of the injection zone, which will avoid the pollution of the water to the mold so that the stripe appears on the surface of the product. Higher mold temperature usually leads to a longer cycle period, but it can improve the appearance of welding line and products. Therefore, the range of mold temperature should be designed between 30 and 40.http://www.wt-mold.com/
Our company founded in 2011,Shenzhen WT Hardware And Plastics Limited takes pride in meeting and exceeding in customer requirements, WT is located in Shenzhen , where is the manufacturing center is in.
We WT are professional in moulds and molding parts, we also support struture design and offer assistance in material selection . You are welcome to look towards WT Mold as an extension of your R&D department , an arm of your design group and manufacture partner.
We have been striving to excellent quality at competitive price, “Quality and Service First”, the principle that we oursure , is exactly why we have established business relationships with customers from all over the world , More than 80% of our molds are exported to USA, EU, CLS, South America, and other Asian countries.
WT Hardware And Plastics Limited
Add: 5B2# Jiangshi Building, Fuyong, Shenzhen, China
Main Product: Plastic Injection Mold & Plastic Parts, Die Casting, CNC Machining