Shenzhen WT Hardware and Plastics
Tel: +86-755-27673590, 23143539
Add: 5B2, Jiangshi Building, Fuyong, Shenzhen, China
Our main products: Injection Mold, Molding Parts, Die Casting Mold, CNC machining of high quality
Plastic moulds - things need our love too!
Plastic mold service life is closely related with the right care, in reality because of improper maintenance caused by the die scrap case too much, so do the mold companies Zhuoda ten or twenty years, such accidents can not remember how many, some mold development more than ten million, how much did not hit it out of its products, mold unbearable pity. The following is a summary of several plastic mold the most basic right maintenance knowledge, for customers to pay the plastic pilots tune to develop basic maintenance practices, so as to prolong the service life of the mold:
Maintenance of the mould before production
A, oil stains on the surface of the mold, rust cleaning to check whether the cooling water holes in the casting mold have foreign objects, and whether there is no water path.
Arc B, need to check whether the damage of mould rubber sleeve, whether there is residual foreign body. The moving parts is abnormal, the action is smooth.
Two. Maintenance of mould in production
1, check all the guide pillars of the mold every day, whether the guide sleeve is damaged, including the mould guide pillar, line position and other parts, regularly add and maintain them, and work and work two times a day.
2, clean the mold parting surface and vent foreign body adhesive filament, foreign body, oil etc. and check whether the abnormal mould thimble and regular Dayou. The parting surface of the cleaning passage two times a day. Guide the tip, bushing, position to determine the tip of the oil once a day.
3. Check the water path of the mould regularly or not, and fasten all the fastening screws.
4. Check whether the limit switch of the mold is abnormal, the slant pin. Whether the skew top is abnormal.
Three. Maintenance of the stop die
Before shutting down, we must first turn off the cooling water, blow the remaining water of the water in the mold, check whether there is any residual glue and foreign matter on the surface of the mold, clean it up and spray the rustproof agent evenly, and fill in the relevant records accurately.
Our company founded in 2011,Shenzhen WT Hardware And Plastics Limited takes pride in meeting and exceeding in customer requirements, WT is located in Shenzhen , where is the manufacturing center is in.
We WT are professional in moulds and molding parts, we also support struture design and offer assistance in material selection . You are welcome to look towards WT Mold as an extension of your R&D department , an arm of your design group and manufacture partner.
We have been striving to excellent quality at competitive price, “Quality and Service First”, the principle that we oursure , is exactly why we have established business relationships with customers from all over the world , More than 80% of our molds are exported to USA, EU, CLS, South America, and other Asian countries.
WT Hardware And Plastics Limited
Add: 5B2# Jiangshi Building, Fuyong, Shenzhen, China
Main Product: Plastic Injection Mold & Plastic Parts, Die Casting, CNC Machining